IP network broadcast audio terminal

The receiving terminal of the digital IP network broadcasting system converts the signal into an audio signal to a fixed-

voltage broadcasting power amplifier.

Product features:

*Can be connected to anywhere the broadcasting network arrives

*Broadcast programs from the host can be played, including music programs, paging and alarms.

*Can receive paging from other terminals

*Supports timed background music.

*Supports real-time paging.

*Remote parameter settings are supported.

*Support remote upgrade

*High-efficiency digital power amplifier, direct drive Speaker

产品详情

IP900背面.jpg

*Input power supply: AC 220v±10% 50/60Hz

*Standby Power: ≤ 1.5W

*Network communication protocols: TCP/IP, UDP, ARP, ICMP, IGMP

*Network chip rate: 10/100Mbps

*Output Sensitivity & source impedance: 0.775V/600Ω(-3dB)

*Frequency response: 40Hz ~ 20kHz (± 3dB)

*Snr: ≥90db

*Total harmonic distortion: ≤ 1%

*Broadcast latency: ≤ 30ms

*Audio bit rate: 16bit 8kbps-320kbps adaptive

*Audio sampling rate: 8kHz ~ 48kHz

*Audio encoding: MP3

*Interface: 1 RJ45 network port, 1 line output, 1 alarm input, 1 alarm output, 3 controlled power supplies (2 three sockets, 1 two sockets), 1 Front USB interface

*Total output power of controllable power supply: ≦ 1500W (maximum output power of a single socket is 1000W)

*Working temperature and humidity:-10℃ ~ 50℃,≤ 90% RH (no condensation)

*Size: 483x180x44mm

*Weight: 1.9kg

Frist-degree Menu

Frist-degree Menu

IP network broadcast audio terminal