Rack Mount Economic IP Amplifier
Rack Mount Economic IP Amplifier
Installed in weak power room or sub-control room of each broadcast management area, it has built-in high-fidelity power amplifier
Rack Mount Economic IP Amplifier
Installed in weak power room or sub-control room of each broadcast management area, it has built-in high-fidelity power amplifier
*black alumina panel, solid handle, professional mechanical assembly process, the appearance is very high-end.
*Built-in 1-channel network hardware audio decoding module, support TCP / IP, UDP, to achieve network transmission 16-bit CD audio quality audio signal.
*Built-in high-fidelity professional analog power amplifier, with 650W(60W/120W/180W/240W/300W/360W/500W/650W) constant voltage 100V power output selection.which can be used to connect 100V constant pressure speaker.
*1-channel (AUX) and 1 microphone (MIC) input interface, with independent volume and treble/bass adjustment potentiometer control, support without internet local paging function.
*1-channel EMC input interface, input emergency alarm voice signal is direct connection (Without switching), with the highest priority.
*1-channel audio signal auxiliary output interface, it can expandable by connect external power amplifier, the standard lotus seat interface, wiring connection is very convenient.
*Built-in intelligent power management, when there is no music or call, it will automatically cut off the power of amplifier, when there is signal, it will automatically turn on the power of amplifier, support IP software programming pre-open power amplifier function.
*Built-in 3-level priority settings EMC is the highest priority.The network alarm signal have higher priority over MIC, AUX and network background music signals.MIC has higher priority over AUX and network background music signals.AUX and network background music at the same priority level.
*Compatible with any network structure such as router, switch, bridge gateway, Modem, Internet.
*Digitalized products, easy expansion, not limited by geographical location, no need to increase the engine room management equipment, adopt the design concept of common network free line construction, easy to installation.
*It Support remote hardware upgrade of the terminal, no need to upgrade at the local site, to reduce maintenance burdens and make more simple operation.
Network Interface:Standard RJ45 input
Transmission Rate:100Mbps
Support Protocol:TCP/IP, UDP
Audio Format:MP3
Audio Mode:16 bits CD sound quality
Sampling Rate:8KHz~48KHz
EMC Input Sensitivity:775mV (Unbalance)
AUX Input Sensitivity:350mV (Unbalance)
MIC Input Sensitivity:5mV (Unbalance)
AUX Output Amplitude:1000mV 2 RCA output
AUX Output Impedance:470Ω
Treble Adjustment Range:±10dB
Bass Adjustment Range:±10dB
Rated Power:60W/120W/180W/240W/300W/360W/500W/650W
Standby Power:<10W
Consumption:Frequency Response:80Hz~16KHz +1/-3dB
THD:≤1%
SNR:>65dB
Output Method:100V constant pressure output
Circuit Protection:DC Output, Overload, Overtemperature,Short Circuit Protection Circuit
Working Temperature:5℃~40℃
Working Environment:20% ~80% relative humidity, no condensation
Input Power:~220V 50Hz
Dimension:484 x 359 x 132mm